Snowmobile, steerable model for 3D printing

STL- This time I tried a snowmobile, an item that had always been talked about as a winter item, but had been put off due to its high level of difficulty. In particular, the structure for rotating the ski could be borrowed from the structure of the Caterham Super 7, but since the angles and structures of the parts were different, it had to be re-adjusted to the angle for printing without support, so it was similar to making it from scratch. In addition, it was very difficult because the steering structure was additionally applied with a handle. But this is how I finished it. However, the steering is not perfect, so I consider it a half success. It’s great for display purposes! Assembly precautions 1. When connecting the body and the steering device (structure), place the structure of the steering device well inside the body and insert the spindle between the shock absorbers. This part is very complicated, so be sure to check out the video. 2. After folding the skis, twist the loop and hang it. Be sure to check out the video for the detailed process. Enjoy the winter atmosphere with this snowmobile. Largest part in printing, size = X 126mm, Y 132mm, Z 31mm Total Build Time : 19h 55m