Miniature Scene | Hobbit House Diorama/DIY

This time I made a Hobbit’s hut with something like a 2-story attic. The main materials used are plaster and cardboard. The plaster is not a special plaster but a very cheap decorative plaster powder. I used sponges to make tree powder. A large amount of tree powder is undoubtedly a considerable expense. Grass powder is cheaper, so I used purchased grass powder. Of course, I also made an electrostatic grass planting machine. If you buy this, it will cost about $50. My production cost is $10. In some areas, it can even be purchased at a lower price. The function of this thing is to make the grass powder stand upright instead of falling down due to the effect of static electricity. Outdoor lighting; tree powder; tree model Since I don’t want to make this video too long, I won’t show the detailed production process in this video. I will put their production process in other playlists right away. I will use the simplest method and cheap materials to make them. In this scene, I used a 5V USB socket to power it, and a total of 7 LED lamp beads were used. In order to stabilize their voltage, I connected a 100 ohm resistor in series to each lamp bead. I didn’t use an integrated circuit board because I think this way of connection will be understood by more people, simpler and cheaper. If there is still something you don’t understand, please leave me a message and I will try my best to answer your questions in detail.