Customized 2024 3003 6082 7005 7075 Extrusion Aluminum Seamless Aluminum Tube/ Pipe for Industry

The Main Process of Seamless Aluminum Tube Seamless aluminum tubes are produced by piercing extrusion, while conventional aluminum tubes are usually extruded by a combined die. Aluminum Alloy seamless tube production principle and process production using the short rod, high temperature, slow speed extrusion process, especially to control the “three temperature”, aluminum rod extrusion cylinder, and die to keep clean, aging time and temperature are adjusted according to the thickness and diameter of the wall. Cold Drawn seamless aluminum Tube (pipe) In the beginning, a drawn structural tube goes through the same process as an extruded tube. However, where an extruded tube is cooled after it is forced through the die, the drawn tube is sent through a second die. This process is called cold drawing or cold working, and it is here that the final dimensions of the product are determined. A drawn tube is just as suitable for transporting gases or liquids under pressure as a seamless extruded tube. a seamless extruded tube is brought to final size by drawing through a die. Closer size tolerances and thinner wall thicknesses than that of extruded tube are available. Product category Products name ：Seamless aluminum tube Process ：Extrude , drawn , machining Diameter：8-350mm Wall thickness：1-80mm Alloy ：2014, 2024, 2A21, 2017, 5052, 5083,5754,7075, 7005 etc Temper ：O H112 H34 T3 T4 T6 T651 T8 etc Surface ：Mill finish, anodized, Delivery period：4 weeks (300kgs-30tons) MOQ ：300 KGS Standard ：ASTM-B241 ; EN755; EN754; The Difference Between a Seamless Tube and a Slit Tube A seamless tube is a tube that does not have any welding seam. A seamless tube may also be known as a seamless pipe. It differs from the main slit tube in that Aluminum ingot processing method Indirect extrusion (seamless tube) surface turning, no scale involved. Direct extrusion (slit tube) of the skin without turning, the product may be involved in the oxide layer. Status of aluminum ingot and container Seamless pipe flow, frictionless;Uniform flow of metal; There is relative friction in the slit pipe. Uneven metal flow; The product contains coarse crystals. Product appearance The inner and outer walls of seamless tube are smooth and burning or cracking on the surface; The appearance of slit tube is generally smooth. Mechanical properties Seamless tube product head and tail metal flow uniformity; High dimensional accuracy; Good fatigue resistance; Consistent mechanical properties;No lamellar tissue. Metal flow from end to end of products with slit pipes is not uniform; Mechanical properties inconsistent; Lamellar tissue is easy to appear. Compare with slit tube the advantage as follow Seamless tube is especially suitable for extrusion of alloy bars and tubes with super hardness (such as alloy 2014, alloy 2024, alloy 2A21,alloy 2017, alloy 5052, alloy 5083,alloy5757, alloy7075, alloy 7005 etc).