How to Replace Front CV Axle 2002-2009 Chevy Trailblazer

Buy Now! New CV Axle Shaft from A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications. This video shows you how to install one in your 2002-2009 Chevy Trailblazer. This process should be similar on the following vehicles: 2002 Chevrolet Trailblazer 2003 Chevrolet Trailblazer 2004 Chevrolet Trailblazer 2005 Chevrolet Trailblazer 2006 Chevrolet Trailblazer 2007 Chevrolet Trailblazer 2008 Chevrolet Trailblazer 2009 Chevrolet Trailblazer Tools you will need: • Flat Blade Screwdriver • Pocket Screwdriver • Pry Bar • 15mm Wrench • 10mm Socket • 13mm Socket • 15mm Socket • 18mm Socket • 19mm Socket • 21mm Socket • 24mm Socket • 36mm Socket • Axle Fork • Brake Caliper Hanger • Trim Tool Set • Needle nose pliers • Needle nose pliers • Side Cutters • Ratchet • Socket Extensions • Torque Wrench • Brass Punch • Center Punch • Hammer • Pick Subscribe: Check out our playlist: Chevy Trailblazer 2002-2009 1st Generation: ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.