Jumper T-Lite: 1W Crossfire mod (powers off when radio is off or when using internal module)

I will show you my attempt at modding the Jumper T-Lite to use an external Crossfire Nano module on 1W. The mod is really simple and you only need a resistor and an N channel MOSFET. This mod allows the external module to be turned off when the radio is turned off or when the internal multi protocol module is used. ❗❗❗UPDATE - READ BEFORE MODDING ❗❗❗ It has been brought to my attention, that there are more efficient N channel MOSFET you should use. Instead of the one I used, go with one of the following: ► IRL540N: ► IRLB8743: They both have a lower Drain-Source resistance and are thus more efficient. DISCLAIMER: I do not take responsibility for your actions. If you attempt this mod, you do it at your own risk. There is a chance of breaking the radio or shorting out the battery if you do something wrong. Be aware that 18650 batteries are not a joke and can be dangerous. Also by doing this you will probably use any support from Jumper and I am pretty confident v