Buy Now!
New Rack & Pinion Assembly from
This video shows you how to install a new TRQ power steering rack and pinion assembly on your 2002-2009 Chevrolet Trailblazer . The rack and pinion assembly transforms the turning motion of your steering wheel to the push and pull motions that turn the front wheels of your vehicle, as well as adding the power assistance. If the steering rack on your vehicle is leaking, or damaged in some way, you might need to replace it entirely.
This repair was done on a 2007 Chevrolet Trailblazer LT Sport Utility 4-Door 4WD Automatic and the process should b
...e similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer
Tools you will need:
• Pry Bar
• 13mm Socket
• 15mm Socket
• 19mm Socket
• 21mm Deep Socket
• 21mm Socket
• 8mm Socket
• Trim Tool Set
• Large Locking Pliers
• Side Cutters
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Swivel
• 1 Inch Wrench
• 1-1/16 Inch Wrench
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves
• Liquid Thread Locker
• Power Steering Fluid
• Safety Glasses
• Floor Jack
• Hammer
• Jack Stands
• Magnet - Extendable
• Wheel Chocks
Subscribe:
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.Show more