Курс Cisco, Routing and Switching. Шаг 6 Динамическая маршрутизация, настройка протокола RIP

Рассматривается настройка протокола динамической маршрутизации RIP version 2 на маршрутизаторах от компании Cisco. Пример настройки маршрутизатора R1: R1(config)#do show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set is subnetted, 2 subnets C is directly connected, FastEthernet0/0 C is directly connected, Ethernet0/0/0 C is directly conne R1(config)#router rip R1(config-router)#version 2 R1(config-router)#network R1(config-router)#network R1(config-router)#network R1(config-router)#do wr Building configuration... [OK] R1(config-router)#do show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area * - candidate default, U - per-user static route, o - ODR P - periodic downloaded static route Gateway of last resort is not set is subnetted, 3 subnets C is directly connected, FastEthernet0/0 R [120/1] via , 00:00:01, FastEthernet0/0 [120/1] via , 00:00:03, Ethernet0/0/0 C is directly connected, Ethernet0/0/0 C is directly connected, FastEthernet0/1 R [120/1] via , 00:00:03, Ethernet0/0/0 R [120/1] via , 00:00:01, FastEthernet0/0 R [120/1] via , 00:00:01, FastEthernet0/0 R [120/1] via , 00:00:03, Ethernet0/0/0 R1(config-router)#