DIY 3D Printed RC AVATAR SCORPION

Link download STL file: Parts: Motor (You need 2 motor): If above motor out of stock. You can find the alternative motor here (choose around 2400KV version): ESC: (You need 2 ESC) Flight Controller: Servo: (You need 2 servo) Links Servo (): (You need 4 Links servo and 4 steel wire 1mm to connect servo with links servo) Rx XM : Tx Qx7: Carbon Tube (OD 8mm. Please note to choose 8mm OD tube): Alternative Link: (You need 2x10cm and 2x18cm of 8mm OD Carbon Tube) Bearing: (You need 4 Bearing) M2 Screws: (You need 16 pcs M2 16mm: 8 pcs to connect Body -1 to Main Body. 8 pcs to connect Body 1 to Main Body | 13 pcs M2 8mm: 5 pcs to connect Body 2 to Body 1. 2 pcs to connect Body -2 to Body -3. 4 pcs to lock servo to Main Body. 2pcs to connect Main Body Cap to Main Body) M2 Nuts: (You need 4 M2 Nuts to hold mainboard plate in Main Body) M3 Screws: (You need 2 pcs M3 16mm to lock 8mm Carbon Tube with Lock Servo and 4 pcs M3 12mm to connect Landing with Body) M3 Nuts Nylon: Propeller: Battery: THANKS SO MUCH for your visiting here, if you have any questions, query or anythings just leave your comments or email me, I will try to reach you all. P/s: If you want to support me more, YOU can do it on patreon or paypal so I have no more difficulty on video budget & expenses making. I am very appreciate it even with small amount it can encourage and help me a lot. Thank you for your considering supporting my work. My Patreon: My Paypal: