How to Calibration RadioLink RC3S 캘리브레이션 방법

Step-by-step: 1. While holding both “Exit” and “Enter,” power on the TX. The unit will be in calibration mode. “MAX” will be selected. 2. Push the trigger all the way outwards, then press enter. 3. Press Inc to select “MID1.” 4. Push the trigger all the way outwards, slowly release it until stops, then press enter. 5. Press Inc to select “MID2” 6. Pull the trigger all the way inwards, slowly release it until stops, then press enter. 7. Press inc to select “MIDV”, and then press enter. 8. Press inc to select “MIN” 9. Press exit to reset. 10. Pull the trigger all the way inwards, release, and press enter. 11. Press inc to select 1LT 12. Press exit to reset 13. Turn the wheel all the way to the left, then press enter. 14. Press inc to select 1CT. 15. Keeping the wheel centered, press enter. 16. Press Inc to select 1RT. 17. Press exit to reset. 18. Turn the wheel all the way to right, then press enter. 19. All entries should be confirmed (highlighte